Products by Shape / Manufacturing Process
Long Fasteners
10 items
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-1.jpg)
Material |
---|
Stainless Steel |
Characteristics |
---|
Example of a part with irregularly shaped protrusions on its flange. Total length : 70 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-2.jpg)
Material |
---|
Stainless Steel |
Characteristics |
---|
Example of a high precision part with very tight concentricity tolerances between the threaded portion and the shank. Total length : 60 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-9.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of a part with two knurled and one threaded section. Total length : 50 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-8.jpg)
Material |
---|
SWP-A |
Characteristics |
---|
Example of a long part with multiple ends. Total length : 60mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-3.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of a part with a combination of a flattened section, bends, a side hole, a middle flange, and a thread. Total length : 80 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-5.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of part with two straight-knurled sections. |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-10.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of a long part with two flanges and a threaded section. Total length : 110 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-4.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of a part with threaded, knurled, and grooved sections. Total length : 160 mm. |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-11-1.jpg)
Material |
---|
Stainless Steel |
Characteristics |
---|
Example of a part combining plastic molding at one end and a sharp point at the other. Total length : 420 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/long-12.jpg)
Material |
---|
Steel |
Characteristics |
---|
Example of a part extruded at both ends. Total length : 330 mm |
![](https://byora.sakura.ne.jp/byora_usa/usa_alpha/wp-content/uploads/2024/01/cf3-1.jpg)
Adavantages of
Cold Forming
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2024/01/deepLM.jpg)
Advantages of
Deep Drawing
![](https://byora.sakura.ne.jp/byora_usa/usa_alpha/wp-content/uploads/2024/01/rolling-image.jpg)
Advantages of
Roll Forming
![](https://byora.sakura.ne.jp/byora_usa/usa/wp-content/uploads/2023/12/en.jpg)