Model | RS525 | RS620 | RS305 | |||||||||||
Photo | ||||||||||||||
Source voltage | Single-phase 100 VAC | Three-phase 200 VAC | Three-phase 200 VAC | |||||||||||
Power consumption | 400W | 400W | 400W | |||||||||||
Drive system | Pressurizing by cam | Pressurizing by cam | Pressurizing by flywheel | |||||||||||
Cycle time | 50Hz | 0.4s (60spm) | 0.6s | 0.3s | ||||||||||
60Hz | 0.5s | 0.3s | ||||||||||||
Allowable pressurization load |
9 kN | 15 kN | 15 kN | |||||||||||
Machine dimensions | Dimensions (mm) | W340 X D585 X H830 | W600 X D800 X H1720 | W600 X D870 X H1550 | ||||||||||
Arm length (mm) | 200 (300 or 400) | 320 (400) | 320 (400) | |||||||||||
Work height (mm) | 280 | 967 | 967 | |||||||||||
Weight (kg) | 110kg | 300kg | 310kg | |||||||||||
Applicable rivet size |
Semi-tubular | SW or BS or CU | Shank diameter | 1.6 ~ 4.5 | Max length L | 12(20) | Shank diameter | 3 ~ 6 | Max length L | 15(25) | Shank diameter | 3 ~ 6 | Max length L | 15(30) |
SUS | 1.6 ~ 3.5 | 3 ~ 5 | 3 ~ 4 | |||||||||||
AL | 1.6 ~ 6 | 3 ~ 6 | 3 ~ 6 | |||||||||||
Self-piercing | SW | Shank diameter | 2 | Max length L | Standard size | Shank diameter | 3 ~ 3.6 | Max length L | Standard size | Shank diameter | 3 ~ 3.6 | Max length L | Standard size | |
SUS | - | 3 ~ 3.5 | 3 ~ 3.5 |
Note) |
|
Code | Description | Code | Description | ||
30BR | Arm length 300 mm (for RS525 only) | ALU | Pilot pin lockup system (pneumatic) | ||
40BR | Arm length 400 mm (for all the models) | MLU | Pilot pin lockup system (mechanical) | ||
AH | Automatic hopper | PS | Punch up/down slide mechanism | ||
PF | Parts feeder | ARP | Rivet forced insertion system | ||
L | L-spec: Length L up to 4 times the shank diameter | ARE | Pneumatic escape system | ||
LL | LL-spec | RS525 | Length L: 15 to 24 mm | E | Power supply specification (e.g., overseas) |
RS305 | Length L: 15 to 30 mm | SP | Spotlight | ||
RS620 | Length L: 15 to 25 mm | T2 | Wheeled table (for desktop type) |
Remarks ) The standard specification of our rivet setter is based on the JIS B 1215 low round head rivet fastening. When the standardized JIS B 1215 rivet has the head other than low round or the dimensions partially different from the specification (e.g., hole diameter), it shall be handled as optional specification. |
Remarks) All the safety devices above are optional extras. |