Characteristics :
Example of a thin-walled hollow part with a square side hole.
Wall Thickness: 0.15 mm.
Characteristics :
Example of a thin-walled hollow stainless steel part with a through hole.
Wall Thickness: 0.1 mm
Characteristics :
Example of a part forged from sheet metal.
Characteristics :
Part with a 0.6mm diameter shank with a 0.35mm diameter hole and a 2.5mm diameter head.
Characteristics :
Example of a 0.5×0.5mm square shanked bent into an L-shape.
Characteristics :
Example of a 1.2×1.2mm square shank with a through hole.
Characteristics :
Example of part with a 0.4×0.4mm square shank.
Characteristics :
Example of a part with a 0.46mm diameter shank,two flanges and a geared tip at one end.
Characteristics :
Example of a part with two different diameter flanges.
Characteristics :
A part with a 0.7 diameter shank with a 0.5mm diameter hole in it and protrusions on the underside of a D-shaped flange.
Characteristics :
Example of a part with very tight tolerances.
Diameter tolerance range: 0.03mm
Thickness tolerance range: 0.024mm
Characteristics :
Example of a part with a 0.3mm diameter shank made from Kovar.
Characteristics :
Example of a 0.77mm diameter shank with a D-shaped flange.
Characteristics :
Example of 0.4mm diameter spherical part.
Characteristics :
Example of a part made from titanium and that has a groove at its tip.
Characteristics :
Example of a clad metal part.